Tips For Replacing a Window Handle
It is easy to change your window handle in the comfort of your home. Follow these guidelines to ensure an elegant and smooth finish.
Remove the screw covers from your uPVC handle to expose the screws. Take a measurement of the spindle to be sure you are getting the correct size replacement.
1. Measure the Spindle length
When you're replacing a window handle, it's crucial to determine the size of the spindle correctly. It could influence the tightness or looseness of the handle, as well as whether the handle will lock properly into the frame of the window. The spindle is a metal shaft that connects the handle and to the lock inside the frame of the window. The spindle could be a standard 8mm cross-section in the industry or the earlier 9mm versions. The current industry standard is 8mm however this wasn't always the case so when buying a new handle it's essential to check the dimensions.
The most efficient method to determine the length of the spindle is remove the existing handle, this can be done by turning it into an open position and then removing the two screws (which could be hidden behind plastic caps that need to be removed) that retain the handle. After removing the handle, you can measure from the base of the handle to the end of the spindle. This will provide you with the measurements required to buy a replacement.
There are many options available when you are looking to pick a new window handle. From sleek chrome that fits in with a modern style, to traditional burnished bronze that looks beautiful in restored Georgian rooms, or even the more quaint Tudor Cottages with curled mongoose-tail latches. There are many options, but the most important thing is to select one that complements your home's style.
Espag handles are generally fitted to uPVC windows and are always identical in size, with 43mm centres (2 fixings). Cockspur handles range between 58mm and 62mm, but luckily there are replacements available for both sizes. Cadenza window handles are a different size again as they have an angled blade which operates an interlocking mechanism that is multi-point inside the window.
When choosing a window handle take into consideration the hand you use to open your door. Inline Espag handles can be used with right or left-handed windows. Cranked window handles are hand-operated and are only used on windows that open in one direction.
2. Take the handle off
A window handle that falls out can be frustrating, regardless of whether the handle is damaged or worn out. However, the good part is that replacing a uPVC window handle is a straightforward job that you can do yourself. You'll need only a few basic hand tools as well as some time to complete the task.
You will need to first open the window and ensure that it is not locked. The next step is to remove the screws that are holding the handle in position. Once these caps are removed, you can start to work on removing the handle itself.
The handle is connected to a spindle inside the window frame. Based on the type it is secured by a screw or pin. The most popular handles are the inline Espagnolette and cockspur handles. window handles www.repairmywindowsanddoors.co.uk of handles are available on casement windows, including aluminium ones. The handles can be locked by using a key to stop unauthorised access from outside. Or you can lock the handles by turning them clockwise.
To take the handle off, you will need to use a flat blade screwdriver to loosen the clip that holds the handle in place. After the clip has been released, the handle should slide off the spindle. After the handle has been removed, you'll be required to measure the length of the spindle in order to make sure that the new handle is compatible with this measurement.
Once you have determined the proper size of the handle, screw it in place. It is crucial to ensure that the handle is securely fastened and that it is rotating in the correct direction (clockwise in the case of an open, or counterclockwise if the handle closes). It is essential to ensure that the handle has not been placed upside down.
Finally, you should replace the screw cover caps. After you've done that then you can test the handle to ensure that it works properly. You can also test the locking system by moving the handle from the unlocked position to the locked position and then back.
3. Remove the Screws
A uPVC window handle is a crucial element of any home and is often the first thing to begin to show signs of wear and tear or damage. This could be due natural causes, frequent use or even intentional damage by criminals trying to gain access to your home. A simple repair can fix the problem and prevent it from happening again.
uPVC handles could also be difficult to remove when the locking mechanisms aren't working correctly. It is often possible to fix the issue by replacing the multipoint locking mechanism, rather than the whole handle. This could save you money.
After you've removed the old handle, you'll need to take off the screws that were holding it in place. These screws are usually located on the inside of the handle base. It may be necessary to use a screwdriver to accomplish this. Be careful not to tighten too much the handle as this could cause it to loosen.
Then, you'll have to locate the pins or screws that keep the handle in place. They are typically located on the inside of the handle base. You'll require a screwdriver to remove them. If you'd like to replace them, you should replace the caps on the screw and check the handle to ensure it functions correctly.
If you're ready to put in the new handle, simply line up the spindle with the cut out in the window mechanism and screw it in the appropriate position. Make sure that the handle is in the open position and that the screws are tightly fixed before replacing the screws' covers should you wish to do this. After this is done, you're done and can enjoy your new window handle. This should help you avoid expensive window and door replacements in the future. If you would like more assistance regarding this or any other aspect of your uPVC windows, don't hesitate to contact us.
4. Install the new handle
Whether you're replacing a broken handle or simply changing it the procedure is simple and can be completed in a matter of a few steps. Identifying the kind of window handle, measuring the length of its spindle and knowing what tools you'll need to complete the task are essential. Safety is always the top priority when working with tools and windows. Be sure to follow the steps and make sure that you have the right handle for use.
To begin, find the screws that hold your window handle. Remove them while firmly gripping the handle to prevent it from falling and causing injury. After the screws have been removed, you can put them in a safe place to be replaced later.
After the handle that was used previously was removed, you can begin fitting the new one. The handle needs to be a perfect fit in order to function correctly and secure the window in its closed position. The next step is to slide the metal square at the back of the handle into the hole in your window mechanism, making sure it is securely in place.
The final step is to replace the caps on the screws and test the handle to ensure it is working. If you're not satisfied with the outcome or if the window does not open and close as it should the next step is to call our experts who will be able to help.
The majority of UK homes have uPVC Windows. This means that a lot of them will need to be changed at some point because of damage or wear. The procedure is simple and can be completed by anyone with a little experience in DIY. It is essential that the handle you choose matches the size and style of your window. Contact our team if you aren't sure of the kind of handle you need. They will be able guide you through all the options.